This website uses cookies to present the best browsing experience.

Kinsten ET20 Etch Tank

Etch tank for PCB etching

Kinsten Etching Tank

Kinsten etching tank for PCB

Kinsten etch tanks are suitable for etching single and double sided PCBs with most etchants. The thin, vertical standing, design uses minimal etchant. The tanks have graduations for easy measurement.

The Kinsten ET20 tank can etch a maximum PCB size of 23×30cm without heater, or 20×30cm with heater. Use with 2000cc minimum, 2300cc maximum liquid.

The optional heater will help maintain optimal etching temperature.

The optional air pump bubbles air through the etchant liquid for efficient etching. The pump must be mounted higher than the liquid level to prevent reverse siphoning when the pump is switched off.

Kinsten etch tanks include three clips to suspend the PCB in the liquid etchant, and a thermometer to monitor liquid temperature. A heater & air pump is required to make an Etch Tank Kit.

Please ensure you order the correct model for your mains voltage. Broadly, 110V is for North America and some areas of Asia, 220V is for Europe and other areas of Asia, 240V is for Australia & New Zealand. However, your area may have a different mains voltage, so please check before ordering.


ET20 Etch Tank Kit (inc. heater & pump)
Order Code
Description
Lot
Qty
Price
/each
Price
/lot
ET-20-110KIT
Etching Tank ET20 (110V Heater & Pump included)
1
US$ 51.80
US$ 51.80
ET-20-220KIT
Etching Tank ET20 (220V Heater & Pump included)
1
US$ 52.60
US$ 52.60
ET-20-240KIT
Etching Tank ET20 (240V Heater & Pump included)
1
US$ 53.10
US$ 53.10
US$ = US Dollar (USD).
An estimate of the price in your local currency can be made at www.xe.com. Note that xe.com rates are 'mid-market'.
Actual price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

ET20 Etch Tank (heater & pump not included)
Order Code
Description
Lot
Qty
Price
/each
Price
/lot
ET-20
Etching Tank ET20 (Heater & Pump required to make ET-Kit)
1
US$ 40.40
US$ 40.40
US$ = US Dollar (USD).
An estimate of the price in your local currency can be made at www.xe.com. Note that xe.com rates are 'mid-market'.
Actual price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

Kinsten heater for ET PCB etching tank

ET Etch Tank Heater
Order Code
Description
Lot
Qty
Price
/each
Price
/lot
EPH20-110
110V Heater for etching tank, USA plug
1
US$ 10.10
US$ 10.10
EPH20-220
220V Heater for etching tank, Euro plug
1
US$ 10.10
US$ 10.10
EPH20-240
240V Heater for etching tank, Australian Plug
1
US$ 10.10
US$ 10.10
US$ = US Dollar (USD).
An estimate of the price in your local currency can be made at www.xe.com. Note that xe.com rates are 'mid-market'.
Actual price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

Kinsten pump for ET PCB etching tank

ET Etch Tank Air Pump
Order Code
Description
Lot
Qty
Price
/each
Price
/lot
RS-238-110
110V Pump for etching tank, USA plug
1
US$ 6.00
US$ 6.00
RS-238-220
220V Pump for etching tank, Euro Plug
1
US$ 6.30
US$ 6.30
RS-238-240
240V Pump for etching tank, Australian Plug
1
US$ 7.50
US$ 7.50
US$ = US Dollar (USD).
An estimate of the price in your local currency can be made at www.xe.com. Note that xe.com rates are 'mid-market'.
Actual price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

PCB clips for Kinsten ET PCB etching tank

Replacement Clip & Wire in Bag of 5.
Order Code
Description
Lot
Qty
Price
/each
Price
/lot
ET-CLIP5
Etching Tank Clip & Wire (5 per bag)
1
US$ 2.40
US$ 2.40
ET-CLIP5\100
Etching Tank Clip & Wire (5 per bag)
100
US$ 2.21
US$ 221.00
US$ = US Dollar (USD).
An estimate of the price in your local currency can be made at www.xe.com. Note that xe.com rates are 'mid-market'.
Actual price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

Themometer for Kinsten ET PCB etching tank

-20~110°C Etching Tank Thermometer
Order Code
Description
Lot
Qty
Price
/each
Price
/lot
ET-THERM
Etching Tank Thermometer
1
US$ 1.20
US$ 1.20
ET-THERM\10
Etching Tank Thermometer
10
US$ 1.03
US$ 10.30
ET-THERM\100
Etching Tank Thermometer
100
US$ 0.91
US$ 91.00
US$ = US Dollar (USD).
An estimate of the price in your local currency can be made at www.xe.com. Note that xe.com rates are 'mid-market'.
Actual price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.


Shipping Cost & Delivery Time

Unless specifically written on the price table, prices don't include freight.

Quoted delivery times are estimates. There are many factors affecting delivery times, especially customs clearance times. It is the purchasors responsibilty to complete all necessary requirements to fulfil their local import regulations.

Orders are shipped from Taiwan. Some orders require to be shipped in multiple cartons, or from more than one shipping depot.

Shipping Methods

Freight Considerations 2020

There have been significant changes to freight transport.

Notably, most services reject chemicals (DP50 developer & EB750 etchant) as general cargo or for post. They have to be sent as Dangerous Goods. We don't offer this service.

While the situation is improving, some orders experience longer than quoted delivery times. This is outside of our control.

Taiwan EMS & International Parcel Post service have limited destinations at this time, and the accepted countries vary according to post office discretion at the time of despatch.

DPEX Courier

We currently find this to be the most economical with availablity to most regions and recommend this service. DPEX delivery time is typically 3-10 days from despatch. Tracking is available for all DPEX deliveries.

EMS Courier

Where available, EMS delivery is generally 3 to 7 days from despatch, but some countries will take longer due to incoming customs delays. Tracking is available for all EMS deliveries.

International Parcel Post

Parcel post can be used when delivery time is not critical, at a lower cost.

Air Post delivery time can vary from 7 days to 45 days from despatch, but is typically delivered within 30 days.

SAL (Surface Air-lifted) Post delivery time is typically 20-45 days from despatch, but is only available to limited destinations.

Surface Post is usually the lowest cost, but not available to all destinations. Typical delivery times are 45 to 120 days from despatch.

Other Courier Services (DHL, Fedex, UPS etc.)

If you require this service, you must specify your own account accepting all freight charges ex shipping depot.

Air & Sea Freight

We can offer FOB (Free on Board) for orders shipped from Taiwan with a value greater than USD7,000. If the order value is less, there will be an additional charges to cover documentation and internal freight cost.

Country & Region Options

Please ensure you select the correct shipping region and country when options are available. Incorrect selection may delay or cancel the order.

There are some countries we cannot accept orders from, due to commercial restrictions.

Some equipment is for use on mains voltage. Please make sure that you choose the appropriate voltage for the location where the equipment will be used. It is not possible or reasonable for Kinsten or its employees to be aware of the correct mains voltage for your intended usage region.

Prices do not include any clearance fees, landing fees, duty, taxes or other charges payable in the destination country. If documentation other than the commercial invoice (example - import permit or consular certification) is required, additional charges will apply.

It is not possible or reasonable for Kinsten or its employees to be aware of any restrictions or regulations on importing items in to any country or region. It is solely the buyers responsibility and cost to ensure items are able to be imported into their selected destination country. Orders are despatched at the buyers risk.

Payment

PayPal

The PayPal delivery address must match the order delivery address. Order despatch may be delayed if there is a discrepancy between the addresses. We will send the order to the PayPal address to ensure buyer and seller PayPal guarantee's where offered by PayPal.

EFT (Electronic Funds Transfer)

We accept EFT payments from Australian bank accounts.

Western Union

We accept Western Union payments from outside of Australia. We recommend payment directly to our bank account, as that may save transfer cost from some countries.

T/T (Telegraphic Transfer)

We accept T/T payments for order payments greater than USD5,000.

Account

We don't offer payment by account. Orders will not be prepared for despatch until payment is received.

Resellers

Check your local regulations regarding resale. Usually, it is OK to buy products for personal use but resellers need to check if there are restrictions. The most common products that might be restricted are products that are mains powered, or have registered/trademarked names.

Product colours

Product colors are examples. Product color and packaging may vary from the display picture.

Warning

Kinsten products should only be used by qualified personel.
Use common sense and ensure that all safety practices are adhered to when using Kinsten products.
Kinsten products are not suitable for use by children except with competent adult supervision taking full responsibility.
Kinsten take no responsibility for the misuse or incorrect use of any product. Check local regulations regarding use and disposal of any Kinsten product.