KVB30D UV exposure box

Make your own Printed Circuit Board

KVB30D

Kinsten KVB30D UV exposure box

The Kinsten UV Exposure Box has a maximum exposure area 230 x 380mm and can be used for single sided, or double sided PCB's.

It includes digital timer & vacuum table.

Three (3) FL-15 tubes top and bottom, ensure high intensity ultra-violet radiation for rapid exposure time. For applications that require more intense UV, Kinsten now offer the KVB30DQ with four (4) lamps per side for 220V regions and KVB30DT with five (5) lamps per side for 110V regions. Due to the size of the ballasts, 240V regions do not yet have a high intensity model.

The dominant UV wavelength is 350~400nm and the KVB-30D, while designed for use with Kinsten presensitised PCB, is often suitable for other applications that require transfering an image to a UV sensitive surface. They have been used in other applications including label making and rubber stamp production, although please check suitability first.

Please ensure you order the correct model for your mains voltage. Broadly, 110V is for North America and some areas of Asia, 220V is for Europe and some areas of Asia, 240V is for Australia & New Zealand. However, your area may have a different mains voltage, so please check before ordering.


6 Lamp UV Exposure Box with Timer and Vacuum Clamp
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
KVB30D-110 110V KVB30D (3 lamps per side)
USA style plug
1 A$ 518.50
≈US$ 384.04
A$ 518.50
≈US$ 384.04
KVB30D-220 220V KVB30D (3 lamps per side)
Euro style plug
1 A$ 518.50
≈US$ 384.04
A$ 518.50
≈US$ 384.04
KVB30D-240 240V KVB30D (3 lamps per side)
Australia style plug
1 A$ 518.50
≈US$ 384.04
A$ 518.50
≈US$ 384.04
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

8 Lamp UV Exposure Box with Timer and Vacuum Clamp
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
KVB30DQ-220 220V KVB30DQ (4 lamps per side) 1 A$ 597.70
≈US$ 442.70
A$ 597.70
≈US$ 442.70
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

10 Lamp UV Exposure Box with Timer and Vacuum Clamp
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
KVB30DT-110 110V KVB30DT (5 lamps per side) 1 A$ 650.50
≈US$ 481.81
A$ 650.50
≈US$ 481.81
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

Replacement Parts for KVB-30D UV Exposure Box
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
KVB30D-FILM Replacement Film for KVB30D Vac Table 1 A$ 10.10
≈US$ 7.48
A$ 10.10
≈US$ 7.48
KVB30D-SEAL Replacement Rubber Seal for KVB30D Vac Table 1 A$ 14.10
≈US$ 10.44
A$ 14.10
≈US$ 10.44
FL-15 KVB Replacement Lamp 1 A$ 12.90
≈US$ 9.55
A$ 12.90
≈US$ 9.55
FL-15 /6 KVB Replacement Lamp 6 A$ 67.92
≈US$ 50.31
A$ 11.32
≈US$ 8.38
FS-2 15W Starter with Condenser 1 A$ 1.10
≈US$ 0.81
A$ 1.10
≈US$ 0.81
FS-2 /6 15W Starter with Condenser 6 A$ 5.70
≈US$ 4.22
A$ 0.95
≈US$ 0.70
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.


Instructions to use KVB30D

Kinsten KVB30D instructions Fig 1.

The power cable is located in the top lid of the exposure box, to release pull small brass knob.(Fig 1.1).

Turn off all switches on the front panel (Fig 1.2) & plug power cable into rear of the KVB30D. Ensure the voltage supply is correct and plug into electricity socket.

Adjust exposure time using Second Preset buttons. Typical exposure time is 60-90 seconds for photoplot and 70-120 seconds for artwork base when used with Kinsten PCB.


Kinsten KVB30D control panel
Kinsten KVB30D instructions Fig 2.

Unlock the vacuum clamp by pushing the metal latches outward with your thumbs, and lift clamp.

Kinsten KVB30D instructions Fig 3.

Remove protective film from presensitised PCB and align the artwork with the PCB. Alignment of double sided PCBs is made easier by using PCB offcuts to make a pouch with the artworks pre-aligned as shown in the image.

Artwork should be printed as a positive (black tracks) reversed image. Lay the printed side against the PCB, so the result will be correct.

Kinsten KVB30D instructions Fig 4

Place the assembled Kinsten PCB and artwork inside the vacuum clamp, leaving a minimum 1cm distance from the air pipe.

Close and latch the vacuum clamp. Start the vacuum pump and wait for approximately 30 seconds until the air under vacuum clamp has been fully removed.

Close box and turn on UV light source, upper/lower or both as required. Display panel counts down seconds and at the end of exposure time, a buzzer will give a 2-3 seconds signal.

Turn off vacuum pump, open the box and wait a few seconds, then unlock the vacuum clamp and open it slowly. Remove and process the PCB.


Caution:

  1. Avoid UV exposure at a short distance for more than 5 seconds. If necessary, wear UV protective glasses.
  2. Adjusting the Second Preset during exposure may interrupt the timer.
  3. Unplug the power cable before replacing the fuse, 3 Amp for 100-120V, 2 Amp for 220-240V.
  4. Do not use solvents on transparent plastic surface, use soft cloth with water/detergent or 50% water/alcohol.
  5. Normal artificial room light will not harm Kinsten presensitised surface if exposed less than 5 minutes.
  6. Breaks and flaws in artwork may be touched up with a black text pen.

KVB30D Specifications

Supply voltage (model dependant) 110Vac-60Hz
220Vac-50Hz
240Vac-50Hz
Power (max.) 300W
UV Source (model dependant) 6 × 15W Fluorescent Lamp
8 × 15W Fluorescent Lamp
10 × 15W Fluorescent Lamp
Mask Area 22 × 37cm
Dimension 51 × 41 × 15cm
Weight 12kg

Shipping Cost

Unless specifically written on the price table, prices don't include freight.

Orders are shipped from Taiwan. Some orders require to be shipped in multiple cartons, or from more than one shipping depot.

Shipping Methods

International Parcel Post

Parcel post can be used when delivery time is not critical, at a lower cost.

Air Post delivery time can vary from 7 days to 45 days from despatch, but is typically delivered within 30 days.

SAL (Surface Air-lifted) Post delivery time is typically 20-45 days from despatch, but is only available to limited destinations.

Surface Post is usually the lowest cost, but not available to all destinations. Typical delivery times are 45 to 120 days from despatch.

EMS Courier

Where available, EMS delivery is generally 3 to 7 days from despatch, but some countries will take longer due to incoming customs delays. Tracking is available for all EMS deliveries.

Courier Service (DHL, Fedex, UPS etc.)

If you require this service, you must specify your own account accepting all freight charges ex shipping depot.

Air & Sea Freight

For larger orders shipped from Taiwan with a value greater than USD7000, we can offer FOB (Free on Board). If the order value is less, there will be an additional charge to cover documentation and internal freight cost.

Country & Region Options

Please ensure you select the correct shipping region and country when options are available. Incorrect selection may delay or cancel the order.

There are some countries we cannot accept orders from, due to commercial restrictions.

Some equipment is for use on mains voltage. Please make sure that you choose the appropriate voltage for the location where the equipment will be used. It is not possible or reasonable for Kinsten or its employees to be aware of the correct mains voltage for your intended usage region.

Prices do not include any clearance fees, landing fees, duty, taxes or other charges payable in the destination country. If documentation other than the commercial invoice (example - import permit or consular certification) is required, additional charges will apply.

It is not possible or reasonable for Kinsten or its employees to be aware of any restrictions or regulations on importing items in to any country or region. It is solely the buyers responsibility and cost to ensure items are able to be imported into their selected destination country. All items are despatched at the buyers risk.

Payment

All prices are in Australian dollars (A$), unless otherwise noted. The final charge in your local currency will be dependant on the exchange rate used by the transferring financial institutions and fees they charge. The Universal Currency Converter may be able to give a guide to the current exchange rate.

The US Dollar (US$) cost is an estimate. The actual US$ cost will depend on the exchange rate used by the transferring financial institutions and any fee's charged.

Credit Card

We accept Visa or Mastercard payment. Credit card payment is not available for all orders or may be subject to additional security check.

PayPal

The PayPal delivery address must match the order delivery address. Order despatch may be delayed if there is a discrepancy between the addresses. We will send the order to the PayPal address to ensure buyer and seller PayPal guarantee's where offered by PayPal.

EFT / Western Union

We accept EFT payments from Australian bank accounts, or Western Union payments from outside of Australia.

Account

We don't offer payment by account. Orders will not be prepared for despatch until payment is received.

Resellers

Check your local regulations regarding resale. Usually, it is OK to buy products for personal use but resellers need to check if there are restrictions. The most common products that might be restricted are products that are mains powered, or have registered/trademarked names.

Product colours

Product colors are examples. Product color and packaging may vary from the display picture.


Warning

Kinsten products should only be used by qualified personel.
Kinsten products are not suitable for use by children except with competent adult supervision taking full responsibility.
Use common sense and ensure that all safety practices are adhered to when using Kinsten products.
Kinsten take no responsibility for the misuse or incorrect use of any product. Check local regulations regarding use and disposal of any Kinsten product.