Kinsten PCB Etching Tank

Make your own Printed Circuit Board

Etching Tank

Kinsten etch tank

Kinsten etch tanks are suitable for etching single and double sided PCBs with most etchants. The thin, vertical standing, design uses minimal etchant. The tanks have graduations for easy measurement.

The Kinsten ET20 tank can etch a maximum PCB size of 23×30cm without heater, or 20×30cm with heater. Use with 2000cc minimum, 2300cc maximum liquid.

The optional heater will help maintain optimal etching temperature.

The optional air pump bubbles air through the etchant liquid for efficient etching. The pump must be mounted higher than the liquid level to prevent reverse siphoning when the pump is switched off.

Etch tanks include three clips to suspend the PCB in the liquid etchant, and a thermometer to monitor liquid temperature.

An ET etch tank includes the etching tank with 3×clips & a thermometer. A heater & air pump is required to make an Etch Tank Kit.

Please ensure you order the correct model for your mains voltage. Broadly, 110V is for North America and some areas of Asia, 220V is for Europe and some areas of Asia, 240V is for Australia & New Zealand. However, your area may have a different mains voltage, so please check before ordering.


ET20 Etch Tank (heater & pump not included)
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
ET-20 Etching Tank ET20 (Heater & Pump required to make ET-Kit) 1 A$ 53.90
≈US$ 39.92
A$ 53.90
≈US$ 39.92
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

ET20 Etch Tank Kit(inc. heater & pump)
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
ET-20-110KIT Etching Tank ET20 (110V Heater & Pump included) 1 A$ 73.70
≈US$ 54.59
A$ 73.70
≈US$ 54.59
ET-20-220KIT Etching Tank ET20 (220V Heater & Pump included) 1 A$ 75.00
≈US$ 55.55
A$ 75.00
≈US$ 55.55
ET-20-240KIT Etching Tank ET20 (240V Heater & Pump included) 1 A$ 75.60
≈US$ 55.99
A$ 75.60
≈US$ 55.99
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

ET Etch Tank Air Pump
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
RS-238-110 110V Pump for etching tank, USA plug 1 A$ 8.30
≈US$ 6.15
A$ 8.30
≈US$ 6.15
RS-238-220 220V Pump for etching tank, Euro Plug 1 A$ 8.70
≈US$ 6.44
A$ 8.70
≈US$ 6.44
RS-238-240 240V Pump for etching tank, Australian Plug 1 A$ 10.40
≈US$ 7.70
A$ 10.40
≈US$ 7.70
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.

ET Etch Tank Heater
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
EPH20-110 110V Heater for etching tank, USA plug 1 A$ 12.10
≈US$ 8.96
A$ 12.10
≈US$ 8.96
EPH20-220 220V Heater for etching tank, Euro plug 1 A$ 12.10
≈US$ 8.96
A$ 12.10
≈US$ 8.96
EPH20-240 240V Heater for etching tank, Australian Plug 1 A$ 12.10
≈US$ 8.96
A$ 12.10
≈US$ 8.96
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.


Replacement clips for Kinsten etch tank.

Kinsten etch tank clips

PCB clips and coated wire for Kinsten etch tanks


Replacement Clip & Wire in Bag of 5.
Order Code Description Lot
Qty
Price
/lot
Price
/pack
Order
(×lot)
ET-CLIP5 Etching Tank Clip & Wire (5 per bag) 1 A$ 3.60
≈US$ 2.67
A$ 3.60
≈US$ 2.67
ET-CLIP5 /100 Etching Tank Clip & Wire (5 per bag) 100 A$ 289.00
≈US$ 214.05
A$ 2.89
≈US$ 2.14
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.


Replacement thermometer for Kinsten etch tank.

Kinsten etch tank thermometer

-20~110°C thermometer to suit Kinsten etching tank.


-20~110°C Etching Tank Thermometer
Order Code Description Lot
Qty
Price
/lot
Price
/unit
Order
(×lot)
ET-THERM Etching Tank Thermometer 1 A$ 2.20
≈US$ 1.63
A$ 2.20
≈US$ 1.63
ET-THERM /10 Etching Tank Thermometer 10 A$ 15.20
≈US$ 11.26
A$ 1.52
≈US$ 1.13
ET-THERM /100 Etching Tank Thermometer 100 A$ 125.00
≈US$ 92.58
A$ 1.25
≈US$ 0.93
A$ = Australian Dollar ( AUD ).
The US$ ( USD ) price is an estimate only. Actual US Dollar price will depend on the exchange rate used by the transferring financial institution and any fee's they charge.


Shipping Cost

Unless specifically written on the price table, prices don't include freight.

Orders are shipped from Taiwan. Some orders require to be shipped in multiple cartons, or from more than one shipping depot.

Shipping Methods

International Parcel Post

Parcel post can be used when delivery time is not critical, at a lower cost.

Air Post delivery time can vary from 7 days to 45 days from despatch, but is typically delivered within 30 days.

SAL (Surface Air-lifted) Post delivery time is typically 20-45 days from despatch, but is only available to limited destinations.

Surface Post is usually the lowest cost, but not available to all destinations. Typical delivery times are 45 to 120 days from despatch.

EMS Courier

Where available, EMS delivery is generally 3 to 7 days from despatch, but some countries will take longer due to incoming customs delays. Tracking is available for all EMS deliveries.

Courier Service (DHL, Fedex, UPS etc.)

If you require this service, you must specify your own account accepting all freight charges ex shipping depot.

Air & Sea Freight

For larger orders shipped from Taiwan with a value greater than USD7000, we can offer FOB (Free on Board). If the order value is less, there will be an additional charge to cover documentation and internal freight cost.

Country & Region Options

Please ensure you select the correct shipping region and country when options are available. Incorrect selection may delay or cancel the order.

There are some countries we cannot accept orders from, due to commercial restrictions.

Some equipment is for use on mains voltage. Please make sure that you choose the appropriate voltage for the location where the equipment will be used. It is not possible or reasonable for Kinsten or its employees to be aware of the correct mains voltage for your intended usage region.

Prices do not include any clearance fees, landing fees, duty, taxes or other charges payable in the destination country. If documentation other than the commercial invoice (example - import permit or consular certification) is required, additional charges will apply.

It is not possible or reasonable for Kinsten or its employees to be aware of any restrictions or regulations on importing items in to any country or region. It is solely the buyers responsibility and cost to ensure items are able to be imported into their selected destination country. All items are despatched at the buyers risk.

Payment

All prices are in Australian dollars (A$), unless otherwise noted. The final charge in your local currency will be dependant on the exchange rate used by the transferring financial institutions and fees they charge. The Universal Currency Converter may be able to give a guide to the current exchange rate.

The US Dollar (US$) cost is an estimate. The actual US$ cost will depend on the exchange rate used by the transferring financial institutions and any fee's charged.

Credit Card

We accept Visa or Mastercard payment. Credit card payment is not available for all orders or may be subject to additional security check.

PayPal

The PayPal delivery address must match the order delivery address. Order despatch may be delayed if there is a discrepancy between the addresses. We will send the order to the PayPal address to ensure buyer and seller PayPal guarantee's where offered by PayPal.

EFT / Western Union

We accept EFT payments from Australian bank accounts, or Western Union payments from outside of Australia.

Account

We don't offer payment by account. Orders will not be prepared for despatch until payment is received.

Resellers

Check your local regulations regarding resale. Usually, it is OK to buy products for personal use but resellers need to check if there are restrictions. The most common products that might be restricted are products that are mains powered, or have registered/trademarked names.

Product colours

Product colors are examples. Product color and packaging may vary from the display picture.


Warning

Kinsten products should only be used by qualified personel.
Kinsten products are not suitable for use by children except with competent adult supervision taking full responsibility.
Use common sense and ensure that all safety practices are adhered to when using Kinsten products.
Kinsten take no responsibility for the misuse or incorrect use of any product. Check local regulations regarding use and disposal of any Kinsten product.